Biathlon clamp – is used for mounting SCATT optical sensors on barrels with diameters of 16, 18, 19 and 22 mm.Does not shift during the rifle's recoil when training with a live shot.

Optical sensor mount for archery – allows to mount SCATT optical sensor on bows. The mount is fixed with the vibration damper screw and allows adjusting position of the optical sensor in two axis (vertical and horizontal) in the range of +/- 150

Control unit interface cable- Type A-B- Used to connect the control unit to USB port of computer- Has a length of 1.5m

Electronic target - (Model: WT-01) - Installed instead of the usual target - Powered by the target control, no need for external power supply- Exercise and distance can be varied - Electronic targets can be used at distances from 5 to 12 meters, which allows to train at different places- Usable for LG, LP or self-printed target- Only suitable for indoor use- Red/green LED's on top and bottom for traffic light simulation (sport pistol duel)- The target has a built-in wireless connection and can be used with the  wireless optical SCATT sensors - The target is made of durable ABS plastic and can withstand bullets from an air rifle- The SCATT protect frame is necessary for parallel operation in the shooting range!

- Symmetrical design- Sensor can be mounted on both sides- Combination with 2 sensor weights for exactly the same weight conditions for training and competition- Stainless steel- suitable for barrel diameter Ø19.3 - Ø20.0 mm- Weight 40g

For mounting the optical sensor (MX) to Pardini SP and SP Rapid Fire

- Fits all SCATT holders- Weight 46 g similar to the SCATT sensor MX-02 + cable weight component- stainless

- Suitable for all Steyr LP with barrel jacket (also EVO and EVO10)- Clamp mounting- stainless- Weight 5g

- Metal strut designed to protect the SCATT-Sensor- Fits in all UIT profile rails

Optical sensor interface cable - Used to connect the optical sensor OS-01 to an USB port of the computer- Has a length of 3m

- For MX-02 and a safe mounting in case of strong recoil- Prism inc. 2  Universal sensor holding clamps- Bracket for mounting the optical sensor on barrels and air cylinders.- Allows swiveling around the barrel axis.

WHILE STOCK LASTSBarrel adapter- Are used to secure the optical sensor on the barrels less than 20 mm diameter

- Used to mount the optical sensor on the short-guns- Available in differnt calibers 

SCATT BasicSCATT Basic - is the newest, and least expensive model among all SCATT training systemsThis model is designed to be a great training tool for juniors, beginners, and mid-level shooters who want to take the smartest route to improve their scores, and shooting technique.It is capable of working inside and outside, at distances of 2.5 meters and above, and supports both dry-fire and live-fire training.Another standout feature of this model in comparison to other SCATT systems is the lack of an electronic target.Which means that now you will be able to train by simply using a paper target or a standard target installation (i.e. SIUS). In live fire training you don’t have to worry anymore about damaging the expensive device.

- Optical sensor mount for archery - The mount is fixed with vibration damper screws- Adjusting position of the optical sensor in two axis

- Used for mounting the optical sensor on barrels of 20 mm diameter- Weight 10 grams

- used for mounting the SCATT optical sensor on barrels of 20, 21, 22 and 23.5 mm diameters- weight 14 gramsDOES NOT FIT FOR AR

- Used to mounting the optical sensor on barrels from 6 till 19 mm diameter- Weight 13 grams- Optimal holder for the free pistol

WHILE STOCKS LAST! SCATT Diaphragm for the old long SCATT MX-02 sensors. 

- Used for fixing optical sensor on the barrels of different diameters- Made of stainless steel 0.2 mm

Mounting plate XXL — used for fixing optical sensor on the barrels of big diameters or cross-sections.Made of stainless steel 0.2 mm.- Length 150 mm

- Used for fixing optical sensor on the barrel or gas cylinder.- Allows you to change angle of the optical sensor attachment relative to the axis of bore.- Relevant for training at a small distances to electronic target- Reduction of the parallax.

It's an electronic computer trainer intended for shooting practice with fixed targets.The unique feature of this system is the ability to train either in the dry fire mode or in live fire, using real ammunition.The trainer is also designed to be used both indoors and at outdoor shooting ranges.Another standout feature of this model in comparison to other SCATT systems is the lack of an electronic target.Which means that now you will be able to train by simply using a paper target or a standard target installation (i.e. SIUS).In live fire training you don't have to worry anymore about damaging the expensive device.

SCATT MX-W2 - the latest model in the SCATT MX series.With this system you can practice at reduced and real distances, indoors and outdoors, in dry fire mode (without ammunition) and live fire mode (real shooting).Wireless optical sensor - can be mounted on most types of weapons and can be synchronized via Wi-Fi.The operating time of the sensor with a fully charged battery is at least 3 hours.- It is a wireless optical sensor with the possibility of connection to the computer or portable device via Wi-Fi. (USB connection also available).- The sensor can be used for both dry practice and live practice at distances from 2 to 1000 meters.- The sensor has an internal Li-Polimer battery that provides at least 3 hours of non-stop training. (The battery manufacturer guarantees that the battery will retain at least 50% of its capacity after five years of use).- The sensor weighs only 56 g. The new system is compatible with all standard SCATT closures.- All other features are similar to the SCATT MX-02 model. SCATT Expert software, Android APP planned.